|
|
More images
Features
-
Three-Point rigid mounting for Category I -- Suitable for 20 to 45
HP tractors.
Allows weight transfer onto backhoe when the hydraulic stabilizers are down and locks
backhoe into position for maximum digging power.
-
Lower drawbar link locks standard for more stability in operation and
transportation of the backhoe.
-
Semi-rigid Frame Mountings available for selected tractors.
-
Mountings available for selected skid steer loaders.
-
Bucket widths available range from 9" to 24".
Buckets are heavy-duty with side cutting edges and "2A" size replaceable
teeth for digging in all types of soil.
-
Patented Hydraulic Swing Cushioning slows and stops swing
automatically at end of travel which prevents "Shock Load".
-
Dual double acting swing cylinders -- one pushing, one pulling, for a
powerful, smooth and controllable full 180° swing.
-
Equipped with a boom safety lock for transportation.
-
Optional independent hydraulic system pump rated for 8 GPM.
-
Optional yellow and black color; all black standard.
Specifications
Tractor hydraulics must be rated for at least 2000 PSI.
Tractor front counter weights may be needed for stability and safe operation.
Specifications and design are subject to change without notification.
U.S. Patent No. 4,393,751 applies.
Specifications are based on boom pivot being 11" above ground level and will vary with
tractor model.
| A |
Maximum digging depth |
8' 0" |
|
Digging depth with 2' flat bottom |
7' 6" |
| B |
Reach from swing pivot |
10' 11" |
| C |
Transport height |
7' 10" |
| D |
Bucket clearance |
6' 6" |
| E |
Bucket curl |
165° |
| F |
Swing arc |
180° |
| G |
Stabilizer spread, operating position |
7' 0" |
| H |
Stabilizer spread, transport position |
5' 8" |
|
Bucket pry-out power |
6,900 lbs. |
|
Bucket curl power at cutting lip |
3,200 lbs. |
|
Crowd power at end of dipper stick |
1,692 lbs. |
|
Lift at end of boom |
760 lbs. |
|
Lift at end of dipper stick fully extended |
455 lbs. |
|
Hydraulic system relief valve setting |
2,000 PSI |
|
Hydraulic flow requirements |
4.5 to 6.0 GPM |
Approximate shipping weight 860 lbs. ( less bucket )
| Bucket width |
Cutting width |
Number of teeth |
Struck capacity |
Heaped capacity |
Weight |
| 9" |
10" |
3 |
0.68 cu. ft. |
0.82 cu. ft. |
60 lbs. |
| 12" |
13" |
3 |
0.90 cu. ft. |
1.11 cu. ft. |
65 lbs. |
| 15" |
16" |
4 |
1.13 cu. ft. |
1.41 cu. ft. |
75 lbs. |
| 18" |
19" |
4 |
1.35 cu. ft. |
1.69 cu. ft. |
85 lbs. |
| 24" |
25" |
5 |
1.80 cu. ft. |
2.16 cu. ft. |
105 lbs. |
| Hydraulic cylinder |
Piston diameter |
Stroke |
| Boom |
2-1/2" |
20" |
| Dipper stick |
2-1/2" |
14" |
| Bucket |
2-1/2" |
14" |
| Swing |
2-1/2" |
10" |
| Stabilizer |
2" |
10" |
|
