|
|
More images
Features
-
Three-Point rigid mounting for Category II and III -- Suitable for 50
to 150 HP tractors.
Allows weight transfer onto backhoe when the hydraulic stabilizers are down and locks
backhoe into position for maximum digging power.
-
Lower drawbar link locks standard for more stability in operation and
transportation of the backhoe.
-
Bucket widths available range from 12" to 36".
Buckets are heavy-duty with side cutting edges and "2A" size replaceable
teeth for digging in all types of soil.
-
Optional ripper tooth for roots and frozen or compacted soil.
-
Patented Hydraulic Swing Cushioning slows and stops swing
automatically at end of travel which prevents "Shock Load".
-
Dual double acting swing cylinders -- one pushing, one pulling, for a
powerful, smooth and controllable full 180° swing.
-
Optional independent hydraulic system pump rated for 9 GPM.
Specifications
Tractor hydraulics must be rated for at least 2000 PSI.
Tractor front counter weights may be needed for stability and safe operation.
Specifications and design are subject to change without notification.
U.S. Patent No. 4,393,751 applies.
Specifications are based on boom pivot being 11" above ground level and will vary with
tractor model.
| A |
Maximum digging depth |
10' 6" |
|
Digging depth with 2' flat bottom |
10' 0" |
| B |
Reach from swing pivot |
12' 6" |
| C |
Transport height |
7' 9" |
| D |
Bucket clearance |
7' 4" |
| E |
Bucket curl |
172° |
| F |
Swing arc |
180° |
| G |
Stabilizer spread, operating position |
10' 7" |
| H |
Stabilizer spread, transport position |
6' 5" |
|
Bucket pry-out power |
12,000 lbs. |
|
Bucket curl power at cutting lip |
5,500 lbs. |
|
Crowd power at end of dipper stick |
3,000 lbs. |
|
Hydraulic system relief valve setting |
2,250 PSI |
Approximate shipping weight ( less bucket ) 1,600 lbs.
| Bucket width |
Struck capacity |
Weight |
| 12" |
1.50 cu. ft. |
110 lbs. |
| 15" |
1.85 cu. ft. |
130 lbs. |
| 18" |
2.25 cu. ft. |
140 lbs. |
| 24" |
3.00 cu. ft. |
165 lbs. |
| 30" |
2.61 cu. ft. |
160 lbs. |
| 36" |
3.14 cu. ft. |
185 lbs. |
| Ripper tooth attachment |
|
50 lbs. |
| Hydraulic cylinder |
Rod diameter |
Piston diameter |
Stroke |
| Boom |
1-3/4" |
3" |
32" |
| Dipper stick |
1-1/2" |
2-1/2" |
26" |
| Bucket |
1-1/2" |
2-1/2" |
26" |
| Swing |
1-3/8" |
2-1/2" |
12" |
| Stabilizer |
1-3/8" |
2-1/2" |
15" |
Optional Equipment
|
